TSP-BCM

This module provides a professional battery management system to charge and monitor an external lead-acid battery. Together with a power supply of the TSP series, a perfect DC-UPS system can be configured. The connected battery will be charged and held in charged mode by the power supply. In the event of a mains power failure the battery will supply the output power until the battery is discharged. As a consequence, the output voltage of the system is equivalent to the battery voltage. To avoid overcharging the battery, an external temperature sensor adjusts the battery voltage automatically to the required end of charge voltage. This can extend the battery life.
The battery is protected against deep discharge. Mains power and battery status are monitored regularly and failures indicated by corresponding LED’s and alarm outputs. The module also provides an external On/Off input to switch-off both, power supply and battery.

View Models

Keep me updated

Keep me updated on the series "TSP-BCM"

I agree to the terms and conditions

Product Status

Active

Product is recommended for new designs.

Features

Battery protection for over voltage,
deep discharge, short circuit and
reverse connection

Alarm outputs for input, output and battery condition

Remote On/Off for battery and power supply

Controlled end of charge voltage by temperature sensor

International safety approval package

3-year product warranty

Conformity

REACH Declaration

TRACOPOWER products do not generally fall under the REACH directive.
Our general REACH declaration is available via the following link:

General REACH declaration

RoHS Compliance

TRACOPOWER completed successfully in July, 2006 the process of producing all power supply and dc/dc converter fully compliant to the European RoHS Directive (2002/95/EC). Excepted are those products which have been removed from the actual sales program (obsolete products).
The EU RoHS Directive and the China RoHS both denominate identical Substances and MCV’s (Maximum Concentration Values).
The current TRACO POWER RoHS declaration therefore satisfies the EU RoHS Directive as well as the China RoHS Regulation.

Directive 2011/65/EU

TRACOPOWER RoHS Declaration

CE / UKCA Declaration

For those Power Supplies which fall under the Low Voltage directive (2014/35/EU) or the EMC directive (2014/30/EU) or ATEX directive (2014/34/EU) or RoHS directive (2011/65/EU) of the European Union TRACO Electronic AG provides a CE Declaration.

The following link will take you to the declarations of conformity for the selected product:

Link

Additional Info

Compliance & Conformity 应用说明、术语表、常见问题